海上风电升压站平台高程确定标准的合理性研究     

潘晓春 《海洋技术学报》2019,38(6):83-88

为保证海上风电升压电站建设的经济合理与安全可靠,合理确定海上风电升压电站平台高程十分必要。文中从波浪与潮位的遭遇组合、最大波高取值与现行相关标准的比较、最大波峰高度计算的合理性等方面,全面分析了确定海上风电升压站平台高程各组成项取值标准的合理性,研究认为现行标准明显偏高。建议海上升压站平台底部高程按"100年一遇极端高水位+重现期50年波列累积频率1%的最大波峰高度+安全超高"确定。结合工程实例计算分析,按本文建议可使海上升压站平台高程明显降低,从而节省工程造价,还可减轻升压站工程对周边风机的遮蔽影响,以达到多发电量的效果。  相似文献   

GRB 170817A的洛伦兹因子和观测角          下载免费PDF全文

林一清 《天文学报》2020,61(1):6

伴随着引力波事件GW170817的短暴GRB (Gamma-Ray Burst) 170817A首次提供了双中子星并合与短暴相联系的直接证据.但是短暴GRB 170817A具有非常弱的光度,意味着观测的视线方向可能偏离喷流轴方向.根据短暴静止系的峰值能量E_(p,i)和各向同性光度L_(iso)。之间的关系以及洛伦兹因子Γ和L_(iso)。之间的关系估算了短暴GRB 170817A以及长短暴GRB 060614观测角与喷流边缘的夹角θ'_(obs)和洛伦兹因子Γ,结果表明GRB 170817A的Γ=45±27,θ'_(obs)=2.2±0.5°,而GRB 060614的Γ=214±93,θ'_(obs)=0.5±0.1°.这个结果相当于GRB 170817A的正轴各向同性光度L_(iso,on)=(2.1±0.7)×10~(49) erg·s~(-1),比典型的短暴少2-3个数量级.GRB 060614的L_(iso,on)=(5.12±1.91)×10~(51) erg·s~(-1)与典型短暴相当.这意味着GRB 060614可能属于短暴类型,而GRB 170817A可能本质上就是一个弱暴.  相似文献   

一种基于M估计的Robust-ELM滑坡位移预测方法     

高彩云  高宁 《大地测量与地球动力学》2019,39(2):153-157

采用传统ELM算法进行滑坡位移预测时，其网络输出权值由最小二乘估计得出，导致ELM抗差能力较差，从而造成网络训练参数不准确。为此，将M估计与ELM相结合，提出一种基于M估计的Robust-ELM滑坡变形预测方法。该方法利用加权最小二乘方法来取代最小二乘法计算ELM输出权值，以减少滑坡监测数据中粗差对ELM预测的干扰。分别以链子崖、古树屋滑坡体为例，将Robust-ELM进行了单维、多维粗差的抵御性验证。结果表明，该方法能够有效降低粗差对预测的影响，具有良好的抗差能力。  相似文献   

二次曲面与最小二乘配置的组合模型在GPS高程异常拟合中的应用     

吕建伟  张志华  张新秀  刘祖昱 《测绘通报》2020,(5):127

在工程实践应用中，为了有效利用GPS高程数据，减少对传统水准测量的依赖，提高GPS高程异常的拟合精度便显得十分重要。为此，本文在介绍二次曲面拟合和最小二乘配置拟合基本原理分析、算法过程推导的基础上，提出了一种新的高程异常拟合方法。首先在二次曲面拟合的基础上，计算得到原始观测数据与拟合数据之间的残差序列，然后采用最小二乘配置模型对包括二次曲面拟合模型误差的综合误差进行优化减弱，最后得到新的高程异常。通过实例，将二次曲面拟合法，最小二乘配置法与文中提出的新方法进行比较分析。结果表明：新的组合方法的拟合预测精度要明显优于最小二乘配置及二次曲面拟合。  相似文献   

Inter-comparison of remote sensing platforms for height estimation of mango and avocado tree crowns     

《International Journal of Applied Earth Observation and Geoinformation》2020

To support the adoption of precision agricultural practices in horticultural tree crops, prior research has investigated the relationship between crop vigour (height, canopy density, health) as measured by remote sensing technologies, to fruit quality, yield and pruning requirements. However, few studies have compared the accuracy of different remote sensing technologies for the estimation of tree height. In this study, we evaluated the accuracy, flexibility, aerial coverage and limitations of five techniques to measure the height of two types of horticultural tree crops, mango and avocado trees. Canopy height estimates from Terrestrial Laser Scanning (TLS) were used as a reference dataset against height estimates from Airborne Laser Scanning (ALS) data, WorldView-3 (WV-3) stereo imagery, Unmanned Aerial Vehicle (UAV) based RGB and multi-spectral imagery, and field measurements. Overall, imagery obtained from the UAV platform were found to provide tree height measurement comparable to that from the TLS (R² = 0.89, RMSE = 0.19 m and rRMSE = 5.37 % for mango trees; R² = 0.81, RMSE = 0.42 m and rRMSE = 4.75 % for avocado trees), although coverage area is limited to 1–10 km² due to battery life and line-of-sight flight regulations. The ALS data also achieved reasonable accuracy for both mango and avocado trees (R² = 0.67, RMSE = 0.24 m and rRMSE = 7.39 % for mango trees; R² = 0.63, RMSE = 0.43 m and rRMSE = 5.04 % for avocado trees), providing both optimal point density and flight altitude, and therefore offers an effective platform for large areas (10 km²–100 km²). However, cost and availability of ALS data is a consideration. WV-3 stereo imagery produced the lowest accuracies for both tree crops (R² = 0.50, RMSE = 0.84 m and rRMSE = 32.64 % for mango trees; R² = 0.45, RMSE = 0.74 m and rRMSE = 8.51 % for avocado trees) when compared to other remote sensing platforms, but may still present a viable option due to cost and commercial availability when large area coverage is required. This research provides industries and growers with valuable information on how to select the most appropriate approach and the optimal parameters for each remote sensing platform to assess canopy height for mango and avocado trees.  相似文献   

Moving from plot-based to hillslope-scale assessments of savanna vegetation structure with long-range terrestrial laser scanning (LR-TLS)     

《International Journal of Applied Earth Observation and Geoinformation》2020

Reliable quantification of savanna vegetation structure is critical for accurate carbon accounting and biodiversity assessment under changing climate and land-use conditions. Inventories of fine-scale vegetation structural attributes are typically conducted from field-based plots or transects, while large-area monitoring relies on a combination of airborne and satellite remote sensing. Both of these approaches have their strengths and limitations, but terrestrial laser scanning (TLS) has emerged as the benchmark for vegetation structural parameterization – recording and quantifying 3D structural detail that is not possible from manual field-based or airborne/spaceborne methods. However, traditional TLS approaches suffer from similar spatial constraints as field-based inventories. Given their small areal coverage, standard TLS plots may fail to capture the heterogeneity of landscapes in which they are embedded. Here we test the potential of long-range (>2000 m) terrestrial laser scanning (LR-TLS) to provide rapid and robust assessment of savanna vegetation 3D structure at hillslope scales. We used LR-TLS to sample entire savanna hillslopes from topographic vantage points and collected coincident plot-scale (1 ha) TLS scans at increasing distances from the LR-TLS station. We merged multiple TLS scans at the plot scale to provide the reference structure, and evaluated how 3D metrics derived from LR-TLS deviated from this baseline with increasing distance. Our results show that despite diluted point density and increased beam divergence with distance, LR-TLS can reliably characterize tree height (RMSE = 0.25–1.45 m) and canopy cover (RMSE = 5.67–15.91%) at distances of up to 500 m in open savanna woodlands. When aggregated to the same sampling grain as leading spaceborne vegetation products (10–30 m), our findings show potential for LR-TLS to play a key role in constraining satellite-based structural estimates in savannas over larger areas than traditional TLS sampling can provide.  相似文献   

多向不规则波浪作用下群墩结构上爬高的计算研究     

季新然  邹丽  任智源  柳淑学 《海洋学报》2019,41(3):35-43

波浪的方向分布对波浪的传播及其与工程结构物的作用都具有明显影响，目前现有的研究大多是基于单向波浪进行的。为了研究方向分布对群墩结构上的爬高影响，基于规则波浪与群墩作用的理论解，结合多向不规则波浪的造波方法，建立了多向不规则波浪与群墩作用的计算模型，同时进行了物理模型试验对模型的有效性进行了验证。系统地对群墩周围及表面上的波浪爬高进行了计算分析，结果表明，方向分布对波浪爬高具有较大的影响，且不同位置处的影响并不相同，在实际的工程设计中如果按照单向波浪计算，可能低估或者高估群墩周围的爬高。  相似文献   

利用远震研究四川盆地及其周缘瑞利面波相速度和方位各向异性          下载免费PDF全文

王小龙  雷兴林  马胜利  张烨  郭志  闻学泽 《地球物理学报》2020,63(2):445-459

基于四川盆地及周边的245个宽频带台站2010年9月—2014年9月期间的远震记录,提取双台路径瑞利面波相速度频散资料,反演得到四川盆地20～120s的高分辨率瑞利面波相速度及各向异性空间分布.在丰富区域地球物理基础数据的同时,结合已有研究成果对地壳上地幔变形耦合进行探讨,结果表明短周期(20～30s)的相速度分布与四川盆地的地质构造特征相吻合,作为川滇地块、松潘—甘孜地块和四川盆地之间的边界——龙门山断裂带和鲜水河断裂带对上述三个地块上地壳的速度结构具有明显的控制作用;松潘—甘孜地块,特别是川滇地块中下地壳普遍表现为明显的低速异常,表明中下地壳相对软弱;而四川盆地的中下地壳整体呈现相对高速,表明四川盆地具有相对坚硬的中下地壳.研究区域东南角接近北扬子地块与南扬子地块的缝合部位,呈现高速异常.四川盆地南部和东南邻区不同周期均具有较强的各向异性,且快波方向较为一致,反映这些地区不同深度变形耦合较好.四川盆地西部、北部及东北部邻区,不同周期的各向异性快波方向变化较大,不同深度变形耦合较差.这些特征与绕喜马拉雅东构造结的物质流动被扬子地块的高速地壳阻挡的宏观认识基本一致.  相似文献   

袭港热带气旋持续时间长期频率分析     

陶山山  宋佳玲  廖振焜  董胜 《中国海洋大学学报(自然科学版)》2020,(2):135-141

香港经常受到西北太平洋热带气旋的影响,对该地区热带气旋持续时间的研究有助于经济社会的稳定发展。按照气象和天文台警告信号,热带气旋分为不同的强度等级。建立热带气旋持续时间的Poisson-Weibull复合分布模型,相应获得持续时间重现值的求解公式,分别用于不同热带气旋分类下持续时间多年一遇重现值的计算中。基于1987-2016年袭港热带气旋数据的分析结果表明,Poisson-Weibull分布适用于不同的持续时间分类样本;强的热带气旋经常会伴随较长的持续时间,这将会对该地区造成更为严重的破坏,这可为防灾减灾提供参考。  相似文献   

SH波水平入射穿越垂直断层隧道动力响应分析     

杜修力  苏驰翔  黄景琦  王媛  赵密  欧阳文龙 《震灾防御技术》2019,14(2):269-280

结合黏弹性人工边界的时域波动输入方法和显式有限元法，设计了含垂直断层三维场地的SH波输入方法。基于建立的输入方法，研究了垂直断层对隧道地震响应的影响，并通过自由场算例验证了该方法具有较好精度。数值模拟结果表明:对于断层迎波侧的隧道结构，断层会对其地震动响应产生显著的放大作用，对于断层逆波侧的隧道结构，断层会对其产生隔离地震动的作用；相对周围围岩，断层介质的剪切波速越小，其产生的放大效应和隔震效果也会越显著；断层宽度越小，其对隧道地震动响应的影响范围也就越小，但是断层宽度的变化对于断层两侧隧道的地震动响应的影响并不明显。  相似文献